K 3500 Truck 4WD V8-6.0L VIN U (2002)
Important: When performing the following service procedure, the transfer case control lever mounting bracket does not have to be removed from the
vehicle.
9. Remove the transfer case control lever mounting bolts.
10. Remove the transfer case control lever assembly.
Installation Procedure
1. Install the transfer case shift lever control mounting bolts.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transfer case control lever mounting bolts.
^
Tighten the transfer case control lever mounting bolts to 2 Nm (18 inch lbs.).
