K 3500 Truck 4WD V8-8.1L VIN G (2002)
5. Remove the rear bracket retainers (1), and remove the bracket (8) from the vehicle.
Installation Procedure
Important: Prior to installing all bolts apply thread locker GM P/N 12345382.
Important: The left side may use a nut plate in place of the washers, and in place of the nuts.
1. Install the rear bracket (8) with the following components:
1. The spacers (7)
2. The bolts
3. The washers
4. The lock washers
5. The nuts-Leave the fasteners hand-tightened at this time.
2. Install the front bracket hook bolts (6) with poly liners to the frame.
3. Install the spacers (5) to the hook bolts.
4. Install the front bracket with the following components:
1. The washers (3)
2. The lock washers (2)
3. The nuts (1)-Leave the fasteners hand-tightened at this time.
5. With an assistant, install the step to the vehicle.
6. With an assistant, install the following components to the rear assist step bracket:
