K 3500 Truck 4WD V8-8.1L VIN G (2002)
Installation Procedure
1. Install the weather-strip from the rear side door opening fully seating the weather-strip into the pinch-weld flange.
2. Install the windshield pillar molding. Refer to Windshield Pillar Garnish Molding Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Windshield Pillar Garnish Molding Replacement).
3. Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement (Regular Cab) (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Rear Quarter Trim Panel Replacement (Regular Cab))Rear Quarter Trim Panel Replacement (Extended Cab) (See:
Interior Moulding / Trim/Trim Panel/Service and Repair/Rear Quarter Trim Panel Replacement (Extended Cab))
4. Install the hinge pillar trim. Refer to Body Hinge Pillar Trim Panel Replacement (See: Interior Moulding / Trim/Trim Panel/Service and
Repair/Body Hinge Pillar Trim Panel Replacement).
5. Install the sill plate. Refer to Front Side Door Sill Trim Plate Replacement (See: Interior Moulding / Trim/Scuff Plate/Service and
Repair/Removal and Replacement/Front Side Door Sill Trim Plate Replacement) or Rear Side Door Sill Trim Plate Replacement (See: Interior
Moulding / Trim/Scuff Plate/Service and Repair/Removal and Replacement/Rear Side Door Sill Trim Plate Replacement).
6. Inspect the door closing effort and seal to door fit.
Front Side Door Weatherstrip Replacement (Regular Cab)
Front Side Door Weatherstrip Replacement (Regular Cab)
Removal Procedure
1. Open the door.
2. Remove the sill plate. Refer to Front Side Door Sill Trim Plate Replacement (See: Interior Moulding / Trim/Scuff Plate/Service and
Repair/Removal and Replacement/Front Side Door Sill Trim Plate Replacement).
3. Remove the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (See: Interior Moulding / Trim/Trim Panel/Service and
Repair/Body Hinge Pillar Trim Panel Replacement).
4. Remove the windshield pillar molding. Refer to Windshield Pillar Garnish Molding Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Windshield Pillar Garnish Molding Replacement).
5. Remove the weatherstrip from the rear side door opening. Pull the unit away from channel, separating the weatherstrip from the pinchweld flange.
Installation Procedure
