K 3500 Truck 4WD V8-8.1L VIN G (2002)
8. Remove the disc brake pads from the brake caliper mounting bracket.
9. Remove the anti-rattle clips from the brake caliper mounting bracket.
Installation Procedure
1. Install the anti-rattle clips to the brake caliper mounting bracket.
2. Install the disc brake pads to the brake caliper mounting bracket.
3. Perform the following procedure before installing the 2 brake caliper mounting bracket bolts.
^
Remove all traces of the original adhesive patch.
^
Clean the threads of the bolts with brake parts cleaner or the equivalent and allow to dry.
^
Apply Threadlock GM P/N 12345493 (Canadian P/N 10953488) to the threads of the bolts.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the brake caliper mounting bracket and the 2 brake caliper mounting bracket bolts.
