K 3500 Truck 4WD V8-8.1L VIN G (2002)
Fuel Pressure Release: Service and Repair
Fuel System Pressure Relief
TOOLS REQUIRED
J34730-1A Fuel Pressure Gage
CAUTION: Relieve the fuel system pressure before servicing fuel system components in order to reduce the risk of fire and personal Injury.
After relieving the system pressure, a small amount of fuel may be released when servicing the fuel lines or connections. In order to reduce file
chance of personal injury, cover the regulator and the fuel line fittings with a shop towel before disconnecting. This will catch any fuel that may
leak out. Place the towel in an approved container when the disconnection is complete.
1. Disconnect the negative battery cable.
2. Remove the fuel injector sight shield (2).
3. Loosen the fuel filler cap in order to relieve the fuel tank vapor pressure.
4. Connect the J 34730-1A to the fuel pressure valve. Wrap a shop towel around the fitting while connecting the gage in order to avoid spillage.
5. Install the bleed hose of the gauge into an approved container.
6. Open the valve on the gage to bleed the system pressure. The fuel connections are now safe for servicing.
7. Drain any fuel remaining in the gauge into an approved container.
