K 3500 Truck 4WD V8-8.1L VIN G (2002)
Four Wheel Drive Selector Switch: Service and Repair
NVG 236/246-NP8 (Two Speed Automatic)
Transfer Case Shift Control Switch Replacement
Removal Procedure
1. Remove the instrument panel bezel trim piece.
2. Pull the tabs on the side of the transfer case driver control switch out.
3. Pull the transfer case driver control switch straight out from the panel.
Installation Procedure
Important: Make sure that the transfer case control switch is seated properly in the instrument panel before installing the instrument panel trim bezel.
