K 3500 Truck 4WD V8-8.1L VIN G (2002)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
Power Steering Pump Replacement
Removal Procedure
1. Place a drain pan under the vehicle.
2. Remove the power steering pulley.
3. Remove the nut (1) and clamp (3) retaining the filler neck (1) to the power steering pump, if equipped.
4. Remove the bolts (2) from the front of the pump.
5. Remove the bolts retaining the power steering mounting bracket.
6. Remove the bolts from the rear of the pump.