K 3500 Truck 4WD V8-8.1L VIN G (2002)
Do not grasp the cable end (2) during this procedure.
11. Release the cable end (2) and allow the blue spring to tension/adjust the cable system.
12. Pull the white cover (3) on the cable end (1) back.
13. Push the natural colored lock button (2) down to engage the locking teeth on the cable end (1).
14. Release the white cover (1).
15. Verify the white cover (1) conceals the natural colored lock (2).
16. If the white cover (1) does not conceal the natural colored lock (2), repeat the cable adjustment procedure.
17. Lower the vehicle and test the transmission for proper shift operation.
18. If all of the gear positions cannot be achieved, repeat the cable adjustment procedure.
Automatic Transmission Range Selector Cable Bracket Replacement
Automatic Transmission Range Selector Cable Bracket Replacement
Removal Procedure
