K 3500 Truck 4WD V8-8.1L VIN G (2002)
Important: Make sure the flywheel is installed correctly. "Engine Side" is stamped on the flywheel to aid with installation.
1. If equipped with a manual transmission, install the engine flywheel.
2. If equipped with a automatic transmission, Install the engine flywheel.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the engine flywheel bolts.
3.1.
Tighten the engine flywheel bolts a first pass to 80 Nm (59 ft. lbs.).
3.2.
Tighten the engine flywheel bolts a final pass to 100 Nm (74 ft. lbs.).
4. If equipped with a manual transmission, install the clutch assembly.
5. If equipped with a automatic transmission, install the transmission.
