K 3500 Truck 4WD V8-8.1L VIN G (2002)
Transfer Case Input Shaft Seal Replacement
Transfer Case Input Shaft Seal Replacement
^
Tools Required
-
J 42738 Seal Installer
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the transfer case from the adapter.
3. Remove the input shaft seal from the transfer case.
Installation Procedure
Important: When installing the input shaft seal, make sure that the part numbers on the seal are facing outward (toward the technician). The input
shaft seal should be even with the surface of the transfer case after installation.
