K Tahoe 4WD V8-4.8L VIN V (2000)
8. If necessary, use a chisel in order to separate the hinge from the pillar.
9. Remove the hinge.
Installation Procedure-Cargo Upper
1. Clean and prepare the pillar surface in order to ensure a flush fit of the service hinge and the fasteners.
Important: Prior to refinishing, refer to GM 4901MD-99 Refinish Manual for recommended products. Do not combine paint systems.
Refer to paint manufacturer's recommendations.
2. Apply an approved anti-corrosion primer.
3. Apply full-body caulk to the entire hinge mounting surface.
