K Tahoe 4WD V8-4.8L VIN V (2000)
1. Install the quarter panel trim to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the quarter panel trim screws.
Tighten the quarter panel trim screws to 2 N.m (18 lb in).
3. Install garnish molding.
4. Install the door sill plate.
5. Install the Third-Pillar trim panel.
6. Install the rear seat.
Rear Quarter Trim Panel Replacement (Utility Right)
Rear Quarter Trim Panel Replacement (Utility Right)
Removal Procedure
1. Remove the rear seat.
2. Remove the Third Pillar trim panel.
3. Remove the garnish molding.
4. Remove the door sill plate.
5. Remove the quarter panel trim screws.
6. Remove the quarter panel trim from the vehicle.
Lift the quarter panel to release the quarter panel from the vehicle.
Installation Procedure
1. Install the quarter panel trim to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the quarter panel trim screws.
