K Tahoe 4WD V8-4.8L VIN V (2000)
Radiator Support: Service and Repair
Radiator Support Replacement (Base)
Radiator Support Replacement (Base)
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable(s).
2. Disable the supplemental inflatable restraint (SIR). Refer to Disabling the SIR System in Restraint Systems.
3. Remove the air intake duct.
4. Remove the grille.
5. Remove the front bumper.
6. Remove the inflatable restraint front end discriminating sensor.
7. Remove the headlamps.
8. Remove the park/turn signal lamp assemblies.
9. Remove the hood latch release bracket and reposition the release cable.
10. Unscrew the headlamp housing support (1) from the radiator support (2). The 15 series lower mounting position is shown. The 25 series mounting
position is similar.
11. Disconnect the horn electrical connector.
12. Remove the radiator.
13. Remove the auxiliary transmission oil cooler (if equipped).
14. Remove the air baffles.
15. Remove the power steering cooler mounting bolts and reposition the cooler.
16. Disconnect the electrical connector from the automatic recirculation switch.
17. Remove the A/C condenser, if equipped.
