K Tahoe 4WD V8-4.8L VIN V (2000)
Head Rest: Service and Repair
Front Seat Head Restraint Retainer Replacement
Front Seat Head Restraint Retainer Replacement
Removal Procedure
1. Slide up the seat back trim cover in order to gain access to the rear cardboard panel fasteners. Refer to Front Seat Back Cushion Cover and
Cushion Pad Replacement.
2. Remove the panel fasteners. Pull back the panel in order to gain access to the bushings.
3. Remove the headrest retainers from the seat back frame by squeezing the retaining tabs together at the base of the guide(s) and lifting up.
Installation Procedure
1. Install the headrest retainers by pressing into the seat back frame until the retaining tabs snap into place at the bottom of the frame opening.
2. Position the cardboard panel to the seat back frame and install the panel fasteners.
3. Install the seat back trim cover.