K Tahoe 4WD V8-4.8L VIN V (2000)
10. Remove the U-channel (1).
11. Remove the drive cable, if equipped with a power recliner.
12. Unsnap the recliner cable from the recliner mechanism.
13. Remove the recliner from the seat frame.
Installation Procedure
1. Attach the recliner cable to the recliner mechanism.
2. Install the drive cable, if equipped with a power recliner.
3. Install the U-channel (1).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the recliner screw (5).
Tighten the recliner screw to 10 N.m (89 lb in).
5. Install the front recliner attachment bolts (4).
Tighten the front recliner attachment bolts to 53 N.m (39 lb ft).
6. Attach the recliner cable (1) to the folding mechanism (3).
