K Tahoe 4WD V8-4.8L VIN V (2000)
7. Attach the bolts holding the seat back folding mechanism.
Tighten the seat back folding bolts to 21 N.m (15 lb ft).
8. Install the outboard pivot bolt.
Tighten the outboard pivot bolt to 35 N.m (26 lb ft).
9. Install the seat back frame.
10. Install the seat cushion frame.
11. Install the seat trim panel.
12. Install the front seat in the vehicle.
Front Seat Cushion Frame Replacement
Front Seat Cushion Frame Replacement
Removal Procedure
1. Remove the front seat from the vehicle.
2. Remove the seat trim panel.
3. Remove the seat cushion trim cover and pad.
4. Remove the following components from the seat cushion frame:
*
The frame springs (1)
*
The frame suspension (2)
*
The plastic retainers (3)
5. Remove the seat cushion frame from the vehicle.
Installation Procedure
1. Install the following components to the seat cushion frame:
