K Tahoe 4WD V8-4.8L VIN V (2000)
*
The plastic retainers (3)
*
The frame suspension (2)
*
The frame springs (1)
2. Install the seat cushion trim cover and pad.
3. Install the seat trim panel.
4. Install the seat into the vehicle.
Rear Seat Back Replacement (Extended Cab w/4th Door)
Rear Seat Back Replacement (Extended Cab w/4th Door)
Removal Procedure
1. Remove the seat from the vehicle.
2. Remove the armrest.
3. Open the access flaps at the lower rear corners of the seat back in order to allow access to the seat-back-to-frame retaining bolts.
4. Remove the bolts from the seat back frame (6).
5. Remove the seat back frame (6) from the seat back cushion frame (7).
Installation Procedure
1. Install the seat back frame (6) to the seat back cushion frame (7).
Notice: Refer to Fastener Notice in Service Precautions.
