K Tahoe 4WD V8-4.8L VIN V (2000)
Removal Procedure
1. Remove the seat from the vehicle.
2. Remove the armrest.
3. Open the access flaps at the lower rear corners of the seat back to allow access to the seat back frame retaining bolts.
4. Remove the bolts from the seat back frame.
5. Remove the seat back frame (10) from the seat back cushion frame (11).
Installation Procedure
1. Install the seat back frame (5) to the seat cushion frame.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts which retain the seat back frame (11) to the seat cushion frame.
Tighten the seat back frame bolts to 35 N.m (26 lb ft).
3. Secure the access flaps at the lower rear corners of the seat back.
4. Install the armrest to the seat back.
5. Install the seat to the vehicle.
