K Tahoe 4WD V8-4.8L VIN V (2000)
3. Install the window.
4. Install the water deflector.
5. Install the door trim panel.
6. Inspect operation of window.
Sealing Strip - Front Door Window Belt Outer (Front)
REMOVAL PROCEDURE
The outer belt sealing strip seals between the inner and outer door panels and the window at the belt line. The outer sealing strip is replaceable. Do not
remove the inner sealing strip, because the strip is attached to the glass run channel.
1. Remove the outside mirror.
2. Remove the outer sealing strip from the door, lifting up on the forward end in order to unhook the rear of the strip from the window run channel.
INSTALLATION PROCEDURE
1. Hook the rear end of the sealing strip into the window run channel. Lower and press the strip into place.
2. Install the outside mirror.
3. Close the door.
Door Window Channel
Front Side Door Window Channel Replacement
Removal Procedure
1. Remove the window.
2. Remove the window glass weatherstrip.