K Tahoe 4WD V8-4.8L VIN V (2000)
4. Install, but do not tighten the caliper guide pin bolts (15/25 series utilities, 25 series pickup).
Notice: Refer to Fastener Notice in Service Precautions.
5. Tighten the caliper guide pin bolts.
^
Tighten the caliper guide pin bolts to 42 N.m (31 lb ft) (15 series).
^
Tighten the caliper guide pin bolts to 108 N.m (80 lb ft) (25 series).
6. Connect the brake hose at the caliper by installing the inlet fitting bolt.
^
Tighten the inlet fitting bolt to 45 N.m (33 lb ft).
7. Bleed the brakes. Refer to Automated Bleed Procedure.
8. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
9. Remove the safety stands.
10. Lower the vehicle.
