K Tahoe 4WD V8-4.8L VIN V (2000)
7. Remove the caliper guide pin bolts (15/25 series utilities, 25 series pickups).
8. Remove the caliper.
9. Inspect the caliper assembly. Refer to Brake Caliper Inspection.
Installation Procedure
1. Install the caliper.
2. Perform the following procedure before installing the caliper guide pin bolts (15 Series pickups only).
2.1.
Remove all traces of the original adhesive patch.
2.2.
Clean the threads of the bolt with brake parts cleaner or the equivalent and allow to dry.
2.3.
Apply Threadlocker GM P/N 12345493 or Red LOCTITE(TM) #272 to the threads of the bolt.
3. Install, but do not tighten the caliper guide pin bolts (15 series pickups).
