K Tahoe 4WD V8-4.8L VIN V (2000)
6. Install the EHCU (1, 2) to the vehicle frame (5). Tighten the three EHCU bracket bolts (4) to 25 Nm (18 lb ft).
7. Connect the two electrical harness connectors to the EBCM (1).
Important: The brake pipes are held in the proper place by a frame mounted plastic bracket. Ensure the brake pipes stay in the correct place for
proper reassembly.
8. Install the 5 brake pipes to the BPMV (6). Tighten the brake pipe fittings to 30 Nm (22 lb ft).
9. Connect the negative battery cable.
10. Bleed the brake system.
11. Return to Diagnostic Starting Point.
