K Tahoe 4WD V8-4.8L VIN V (2000)
Parking Brake Warning Switch: Service and Repair
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the park brake lever. Refer to Park Brake Lever Replacement.
3. Remove the park brake warning lamp switch mounting bolt.
4. Remove the park brake warning lamp switch.
Installation Procedure
1. Install the park brake warning lamp switch.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the park brake lamp switch mounting bolt.
^
Tighten the bolt to 3 N.m (25 lb in).
3. Install the park brake lever. Refer to Park Brake Lever Replacement.
