K Tahoe 4WD V8-4.8L VIN V (2000)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the booster to bulkhead nuts.
^
Tighten the nuts to 36 N.m (26 lb ft).
4. Install the stoplamp switch and the pushrod.
5. Install the master cylinder. Refer to Master Cylinder Replacement.
6. Connect the return hose, the steering gear, and the inlet hoses.
7. Bleed the hydraulic booster system. Refer to Bleeding the Power Steering System in Power Steering System.
