K Tahoe 4WD V8-4.8L VIN V (2000)
1. Install the EBCM (2) on to the BPMV (1).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the four new screws in the EBCM (2).
^
Tighten the four screws to 5 N.m (39 lb in) in an X-pattern.
3. Install or tighten three EHCU bracket mounting bolts.
^
Tighten the EHCU bracket mounting bolts to 25 N.m (18 lb ft).
4. Connect the electrical connectors to the EBCM.
5. Connect the negative battery cable.
6. Revise the tire calibration using the Scan Tool Tire Size Calibration function. Refer to Scan Tool Diagnostics under Testing and Inspection.
7. Return to A Diagnostic Starting Point under Testing and Inspection.
