K Tahoe 4WD V8-4.8L VIN V (2000)
6. Install the upper auxiliary air duct (1) to the air distributor duct. Install the fastener (5).
7. Connect the electrical connectors.
8. Install the RTD Module. Refer to Electronic Suspension Control Module Replacement (Tahoe/Yukon) or Electronic Suspension Control Module
Replacement (Suburban/Yukon XL) in Real Time Damping-RTD.
9. Install the right rear quarter trim panel.
10. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
11. Install the nuts (2) that secure the auxiliary HVAC module to the vehicle.
Tighten
Tighten the nuts to 9 N.m (80 lb in).
12. Install the air conditioning lines (2, 3) and the nut (4) to the auxiliary HVAC module.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
