K Tahoe 4WD V8-4.8L VIN V (2000)
Radiator Hose: Service and Repair
Radiator Hose Replacement - Inlet
Removal Procedure
1. Remove the air inlet duct. Refer to Air Cleaner Assembly Replacement to in Powertrain Management.
2. Drain the cooling system. Refer to Draining and Filling Cooling System.
3. Remove the radiator inlet hose from the fan shroud clip.
4. Remove the radiator inlet hose from the radiator.
5. Remove the engine vent hose from the clip.
6. Remove the radiator inlet hose from the water pump.
7. Remove the radiator inlet hose.
Installation Procedure
