K Tahoe 4WD V8-4.8L VIN V (2000)
Oil Pan: Service and Repair
Oil Pan Replacement
Removal Procedure
Important: The original oil pan gasket is retained and aligned to the oil pan by rivets. When installing a new gasket, it is not necessary to install new
rivets.
DO NOT reuse the oil pan gasket. When installing the oil pan, install a NEW oil pan gasket.
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
2. Remove the front differential if equipped with four wheel drive. Refer to Differential Carrier Assembly Replacement in Front Axle.
3. Remove the under body shield from the vehicle.
4. Remove the oil pan underbody shield.