K Tahoe 4WD V8-4.8L VIN V (2000)
Intake Manifold: Service and Repair
Intake Manifold Removal
Important: The intake manifold, throttle body, fuel injection rail, and fuel injectors may be removed as an assembly. If not servicing the
individual components, remove the manifold as a complete assembly.
DO NOT reuse the intake manifold-to-cylinder head gaskets.
1. Remove the Positive Crankcase Ventilation (PCV) hose (1) and valve (2).
2. Remove the Manifold Absolute Pressure (MAP) sensor (1) (if required).
3. Remove the engine coolant air bleed clamp and hose from the throttle body.
4. Remove the accelerator control cable bracket (2) and bolts (1) (if required).
