K Tahoe 4WD V8-4.8L VIN V (2000)
17. Remove the positive crankcase ventilation (PCV) valve (2) and hose (1).
18. Remove the intake manifold from the engine. Refer to Intake Manifold Removal.
19. Clean and inspect the intake manifold and all sealing surfaces. Refer to Intake Manifold Clean and Inspect.
Installation Procedure
1. Install the intake manifold to the engine. Refer to Intake Manifold Installation.
2. Install the vacuum brake booster hose, if equipped.
3. Install the PCV valve (2) and the hose (1).
4. Connect the fuel pipes to the fuel rail. Refer to Quick Connect Fitting(s) Service (Metal Collar) in Powertrain Management.
5. Connect the purge solenoid vent tube to the purge solenoid. Refer to Evaporative Emission (EVAP) Canister Purge Solenoid Valve Replacement
in Powertrain Management.
Notice: Refer to Fastener Notice in Service Precautions.