K Tahoe 4WD V8-4.8L VIN V (2000)
1. Install the suction hose assembly to the vehicle.
2. Install the hose to the accumulator using new sealing washers.
3. Install the nut at the accumulator.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
4. Install the suction hose to the compressor using new sealing washers.
5. Install the suction hose mounting bolt.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
6. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging. See: Refrigerant/Service and Repair
7. Inspect the system for leaks. Refer to Leak Testing. See: Testing and Inspection/Component Tests and General Diagnostics/Leak Testing
