K Tahoe 4WD V8-4.8L VIN V (2000)
4. Maintain the caster setting while tightening the cam bolt nuts.
-
Tighten the nuts to 190 Nm (140 ft. lbs.).
Important: Verify the toe setting after changing the camber or the caster.
5. Verify the caster and the camber settings after tightening.
Verify the steering wheel pull specification after tightening
6. Readjust the caster and the camber setting if necessary.
Front Wheel Toe Adjustment
1. Loosen the jam nut on the tie rod (2).
2. Rotate the inner tie rod (1) to the required toe specification setting. Refer to Wheel Alignment Specifications (RWD Pick-up) or Wheel Alignment
Specifications (4WD Pick-up) or Wheel Alignment Specifications (RWD Utilities) or Wheel Alignment Specifications (4WD Utilities).
Notice: Refer to Fastener Notice in Service Precautions.
3. Tighten the jam nut on the tie rod.
-
Tighten the front tie rod jam to 68 Nm (50 ft. lbs.).
4. Check the toe setting after tightening.
5. Adjust the toe setting if necessary.
