K Tahoe 4WD V8-4.8L VIN V (2000)
Air Bag(s) Arming and Disarming: Service and Repair
Disabling
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition switch.
IMPORTANT: With the AIR BAG fuse removed and the ignition switch in the RUN position, The AIR BAG warning lamp illuminates. This is
normal operation, and does not indicate an SIR system malfunction.
4. Remove the AIR BAG Fuse from the fuse block.
5. Remove the Connector Position Assurance (CPA) (1) from the driver yellow 2-way connector (2) located at the base of the steering column.
6. Disconnect the driver yellow 2-way connector (2) located at the base of the steering column.
7. Remove the connector position assurance (CPA) (2) from the passenger (IP) yellow 2-way connector (1) located behind the glove box (3).
8. Disconnect the passenger (IP) yellow 2-way connector (1) located behind the glove box (3).
