K Tahoe 4WD V8-4.8L VIN V (2000)
8. Install the positive battery cable to the generator.
9. Install the nut to the back of the generator.
Tighten
Tighten the bolts to 18 N.m (13 lb ft)
10. Install the battery cable junction block to the junction block bracket.
11. Install the negative cable to the retaining clip on the positive cable.
12. Connect the positive battery cable to the engine wiring harness junction block.
Tighten
Tighten the bolt to 9 N.m (80 lb in).