K Tahoe 4WD V8-4.8L VIN V (2000)
1. Install the the bracket (3) from the rear of the pump (1).
Tighten
Tighten the rear bracket retaining nuts to 50 N.m (37 lb ft).
2. Install the pump.
3. Install the hose guide bracket bolt to the pump.
4. Install the bolt retaining the rear bracket to the engine.
5. Install the bolts to the front of the pump.
Tighten
Tighten the bolts to 50 N.m (37 lb ft).
6. For vehicles with variable effort steering, connect the electrical connector.
7. Install the hoses to the pump.
Tighten
Tighten the nut to 28 N.m (20 lb ft).
8. Install the intermediate shaft.
9. Install the power steering pulley.
10. Fill and bleed the power steering system.