chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Steering Column Position Sensor > < Steering Angle Sensor|Locations|Page 11463
Page 2
background image

4. Install the bolt and the nut to the upper end of the shaft.

-

Tighten the nut to 62 Nm (46 ft. lbs.).

5. Connect the negative battery cable.
6. Enable the SIR system. Refer to Enabling the SIR System in Air Bags and Seat Belts.

Steering Column Position Sensor > < Steering Angle Sensor|Locations|Page 11463