K Tahoe 4WD V8-4.8L VIN V (2000)
6. Install the J 36202 to the adjustment arm and the crossmember.
7. Increase the tension on the adjustment arm in order to load the torsion bar.
8. Install the adjustment bolt (3) and the adjuster nut (4) (15 Series).
9. Install the adjustment bolt (3) and the adjuster nut (4) (25 Series).
10. Remove the J 36202 releasing the tension on the torsion bar until the load is taken up by the adjustment bolt.
11. Remove the safety stands.
12. Lower the vehicle.
13. Measure the Z height. Refer to Wheel Alignment Specifications (RWD Pick-up) or Wheel Alignment Specifications (4WD Pick-up) or Wheel
Alignment Specifications (RWD Utilities) or Wheel Alignment Specifications (4WD Utilities) in Wheel Alignment.
