K Tahoe 4WD V8-4.8L VIN V (2000)
15. Position the steering column shift lever to the park position.
16. Remove the steering column shroud. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle (Column Shift) or Steering Column Trim
Covers - Disassemble - Off Vehicle (Floor Shift) or Steering Column Trim Covers - Disassemble - Off Vehicle (Export) In Steering and
Suspension.
17. Remove the driver's seat from vehicle. Refer to Seat Replacement - Front Bucket in Body and Frame.
18. Peal back the carpet and insulation around the driver's area. Refer to Carpet Replacement-Front (Pickup) or Carpet Replacement - Front (Utility)
in Body and Frame.
19. Remove the retainer securing the shift cable to the steering column.
20. Remove the shift cable terminal shaft end from the steering column ball stud.
21. Remove the shift cable conduit end fitting from the steering column bracket.
Depress both tangs on the conduit end fitting and push axially toward the base of the column.
22. Remove the bolt securing the shift cable support to the brace.
Important: Avoid unnecessary twisting/bending of the shift cable when removing the shift cable from the support.
