K Tahoe 4WD V8-4.8L VIN V (2000)
7. Slide the propeller shaft (2), rearward in order to remove the propeller shaft (2) from the transmission or the transfer case.
8. Remove the propeller shaft from the vehicle.
9. Remove the boot from the propeller shaft.
10. Remove the center bearing support nuts (1).
11. Remove the center bearing support (2).
12. Remove the propeller shaft (2) from the transmission (1) or the transfer case with a rearward movement.
13. Clean all parts with an approved solvent.
14. Inspect the outer diameter of the slip yoke for burrs. Burring damages the transmission seal.
15. Inspect for twisted slip yoke splines or possibly the wrong universal joint.
16. Inspect the universal joint bearings for wear. Replace as necessary.
Installation Procedure
