Lumina L4-151 2.5L (1991)
Case: Service and Repair
3T40 (125C) Automatic Transaxle
VALVE BODY COVER 3T40 (125C)
Side Cover And Control Valve View
Valve Body Cover
TOOLS REQUIRED
^
J 28467-A Engine Support Fixture
^
J 36462 Engine Support Adapter Leg
REMOVE OR DISCONNECT
1. Air cleaner assembly.
2. Negative battery cable.
3. Left torque strut at engine.
4. Left torque strut bracket.
5. One bolt at top of transaxle mount bracket.
^
Install J-28467-A and J-36462.
6. T.V. cable.
^
Raise vehicle and suitably support.
7. Left front tire and wheel assembly.
8. Left lower engine splash shield.
9. Left lower ball joint.
10. Pinch bolt at intermediate steering shaft.
CAUTION: Failure to disconnect the intermediate shaft from the rack and pinion stub shaft can result in damage to the steering gear or
intermediate shaft. This damage may cause loss of steering control which could result in personal injury.
^
Support right and left sides of frame with jackstands.
11. Right frame to body bolts.
