Lumina V6-191 3.1L (1990)
Figure 2 - Band Apply Pin Selection Chart
SERVICE PROCEDURE:
(Figures 1 and 2)
When servicing a 1989 or 1990 model year transaxle, use the proper year band apply pin selection chart and gage pin J 33382-10. Gage pin J 33382-10
has a hex head for easy identification.
IMPORTANT:
Do not use the new gage pin J 33382-10 for selecting the proper 1-2 band apply pin. Calibrations will be affected. Reference Figures
1 and 2 for proper 1-2 band apply pin gage.
SERVICE MANUAL REFERENCE:
This product change information is shown in the THM 440-T4/HYDRA-MATIC 4T60 Automatic Transaxle Unit Repair section of your 1990 Service
Manual.
SERVICE TOOL INFORMATION:
The reverse band apply pin gage J 33382-10 will be available later in the 1989 calendar year from Kent-Moore. Order the tool from Kent-Moore's order
department at (313) 574- 2332 or 1-800-345-2233.
SERVICE NOTES:
This change does not affect 1988 or prior model years.