Lumina V6-191 3.1L VIN T MFI (1993)
INSTALLATION
1. Install gasket and coolant pump.
2. Install attaching bolts and torque to 10 Nm (89 lb. in.)
3. Install coolant pump pulley and LOOSELY install attaching bolts.
4. Install serpentine belt.
5. Torque coolant pump pulley bolts to 25 Nm (18 lb. ft.).
6. Install serpentine belt guard, bolts and nuts.
7. Install coolant recovery reservoir.
8. Refill coolant. Refer to Cooling System / Service and Repair / Draining and Refilling. See: Service and Repair
NOTE: To properly fill the system requires the use of the air bleed vents.
9. Inspect for leaks.