Lumina V6-191 3.1L VIN T MFI (1993)
Brake Light Switch: Adjustments
Type 2
TCC Brake Switch (Part Of Electronic Brake Switch Assembly)
INSTALL OR CONNECT
1. New switch assembly into retainer.
^
Hold brake pedal depressed while installing switch or valve. Switch should bottom on retainer. Note that audible clicks can be heard as the
threaded portion of the switch is pushed through the retainer.
^
Slowly pull brake pedal fully rearward against pedal stop moving switch or valve assembly rearward.
^
Release brake pedal and pull back again to assure proper adjustment of switch or valve.
^
Visually reinspect retainer for cracks.
2. Electrical connector(s).
