Lumina V6-191 3.1L VIN T MFI (1993)
REMOVE OR DISCONNECT
-
Valve body cover.
-
Wiring harness from case electrical connector and leads from 3rd clutch pressure switch (governor pressure switch, if applicable).
-
Torque converter clutch bolt to auxiliary valve body.
-
3rd clutch pressure switch.
-
Second clutch switch, if applicable.
INSTALL OR CONNECT
-
Second clutch switch, if applicable.
-
3rd clutch pressure switch.
-
Torque converter clutch bolt to auxiliary valve body. Install new O-ring.
-
Wire harness to case and switches.
-
Valve body cover with a new gasket.
ADJUST
-
Fluid level.
-
T.V. cable.