Lumina V6-191 3.1L VIN T MFI (1993)
into the coupling before shaft installation, the two mating surfaces may disengage.
10. Left lower ball joint.
11. Splash shield.
12. Tire and wheel assembly.
13. Lower vehicle.
14. Remove J-28467-A and J-36462 Engine support fixtures, or equivalent.
15. T.V. cable.
16. Left torque strut bracket.
17. Left torque strut.
18. Negative battery cable.
19. Air cleaner assembly.
ADJUST:
^
Fluid level.
^
T.V. cable.
Transaxle Support Assembly (Bracket)
TRANSAXLE BRACKET
Transaxle Bracket
TOOLS REQUIRED:
^
J 28467-A Engine Support Fixture
^
J 36462 Engine Support Adapter Leg
REMOVE OR DISCONNECT
1. Air cleaner.
2. Negative battery cable.
3. Install J 28467-A and J 36462.
4. Left-hand torque strut bracket.
5. Raise vehicle and suitably support.
6. Left front tire and wheel.
7. Left lower engine splash shield.
CAUTION: Failure to disconnect the intermediate shaft from the rack and pinion stub shaft can result in damage to the steering gear and/or
intermediate shaft. This damage may cause lass of steering control which could result in personal injury.
8. Pinch bolt at intermediate steering shaft.
9. Support right and left sides of frame with jackstands.
10. Nuts attaching bracket to mount.
11. Left frame to body bolts/screws.
