Lumina V6-191 3.1L VIN T MFI (1993)
5. Raise vehicle, assure suitable support.
6. Left front wheel.
7. Left inner fender splash shield.
8. Transaxle mount.
9. Loosen engine mount nuts at frame.
CAUTION: Failure to disconnect the intermediate shaft from the rack and pinion stub shaft can result in damage to the steering gear and/or
Intermediate steering control which could result in personal injury.
10. Pinch bolt at intermediate steering shaft.
11. Ball joints at steering knuckle.
12. Support right and left sides of frame with jackstands.
13. Left side frame to body bolts/screws.
14. Loosen right side frame to body bolts/screws.
15. Left side steering rack bolt/screw.
16. Wiring harness.
17. Left drive axle.
18. Transaxle mount bracket.
19. Position pan under transaxle.
20. Bolts/screws and nuts.
21. Case side cover and pan.
CLEAN AND INSPECT:
^
Case and side cover gasket surfaces.