Lumina V6-191 3.1L VIN T MFI (1993)
indicated bolts in the above figure.
2. Valve body cover bolts and channel plate flange nuts.
3. Torque bolts and nuts to 11 Nm (97 in lb).
4. Transaxle mount bracket.
5. Transaxle oil cooler lines at transaxle.
6. Engine wiring harness to transaxle case.
7. Transaxle mount and mount support.
8. Raise left side of frame and install new frame to body bolts.
9. Pinch bolt at intermediate steering shaft.
CAUTION: When installing the intermediate shaft make sure the shaft is seated prior to pinch bolt installation. If the pinch bolt is inserted into
the coupling before shaft installation, the two mating surfaces may disengage.
10. Left lower ball joint.
11. Splash shield.
12. Tire and wheel assembly.
13. Lower vehicle.
14. Remove J-28467-A and J-36462 Engine support fixtures, or equivalent.
15. T.V. cable.
16. Left torque strut bracket.
17. Left torque strut.
18. Negative battery cable.
19. Air cleaner assembly.
ADJUST:
^
Fluid level.
^
T.V. cable.
INSPECT:
^
For proper completion of repairs.
^
For proper fluid level.
^
For fluid leaks.
^
Proper shift points for T.V. cable adjustment.
