chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Throttle Position Sensor|Specifications|Page 1321 > < Oil Pressure Switch (For Fuel Pump)|Locations|Page 1317
Page 1
background image

Throttle Position Sensor: Specifications

Voltage .............................................................................................................................................................................................  0.20 - 0.74 volts @ idle

Voltage ..............................................................................................................................................................................................  Above 4 volts @ WOT
 
Tech 1 display should vary between 0.2 and 0.74 volts when throttle is closed, to over 4.0 volts when throttle is held at wide open throttle (WOT)
position. Typically, accelerator pedal travel only yields 4.1 or 4.2 volts maximum. If a TP sensor voltage of over 4.8 volts is observed at any point in
normal accelerator pedal travel, replace TP sensor.

Throttle Position Sensor|Specifications|Page 1321 > < Oil Pressure Switch (For Fuel Pump)|Locations|Page 1317