chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Security Lamp/Indicator > < Keyless Entry Receiver|Locations|Page 8209
Page 1
background image

Keyless Entry Transmitter Battery: Service and Repair

With normal use, the battery in the keyless entry transmitter should last for about 2 years.
If the transmitter does not work in the normal range, the battery is weak. If you have to get close to the vehicle in order to operate the transmitter, change
the battery.

Removal Procedure
1. Insert a dime or a flat-bladed tool into the slot on the side of the transmitter. Twist the tool and separate the halves of the transmitter.
2. Remove the battery from the transmitter.

Installation Procedure
1. Install a battery into the transmitter.
2. Reassemble the transmitter. Ensure that the halves are snapped together tightly so that no water will get in.
3. Synchronize the transmitter. 
4. Verify that the transmitter operates correctly. Refer to Keyless Entry System Operation.

Security Lamp/Indicator > < Keyless Entry Receiver|Locations|Page 8209