Lumina V6-3.1L VIN J (2000)
2. Pull on bezel end opposite handle to release retainer.
3. Remove the rear door inside handle bezel from the door.
4. Disconnect the electrical connector.
5. Remove the window switch from the bezel, as needed.
INSTALLATION PROCEDURE
1. Install the window switch to the bezel, as needed.
2. Connect the electrical connector.
3. Install the rear door inside handle bezel to the door.
4. Install the rear door inside handle bezel retainer.
5. Install the rear door inside handle bezel screw.
Door Handle Bezel Replacement
Door Handle Bezel Replacement
Removal Procedure
1. Remove the front door inside handle bezel screw (5).
2. Remove the inside handle bezel (4) from the trim panel.
3. Disconnect the electrical connector, if equipped.
Installation Procedure
1. Connect the electrical connector, if equipped.
2. Position the handle bezel (4) to the inner trim panel.